Sand treatment equipment manufacturers talk about the advantages of bag filter and resin sand production line

Sand treatment equipment manufacturers talk about the advantages of bag filter and resin sand production line

The resin sand production line mentioned by the sand treatment equipment manufacturer is the same as the bag filter. It consists of mechanical equipment such as magnetic separator belt conveyor, vibration crushing reactivation, secondary reactivation of suction filter rotor, sand bin, single bucket hoist, boom rotary resin sand mixer, single pulse back blowing dust removal equipment, etc. Molding (core) sand prepared with binder on clay sand production line. Mechanical automation of sand handling is a key component of forging manufacturing. The sand mixer is a machine that makes the components in the sand evenly mixed and makes the binder reasonably coated on the surface of the sand.

After casting sand boxes and castings on the production line, lift them to the inertial force vibration sand drop machine with a crane. After the sand drop is solved, the castings are transported to the cleaning workshop, and the production line sand box is transported to the sand box warehouse for storage. -Hand-screened block leather products in the lifter are placed in the tape separator according to the small stones, sand balls and a small piece of cooling iron in the falling sand grid diagram. After magnetic separation by the magnetic separation belt machine, the lifting pipe is transported to the intelligent vibrator for crushing, film removal and screening. The screened sand enters the bucket elevator of the resin sand production line, and the bucket elevator is improved into a suction filter rotor machine, which is a firm and completely falling plastic film.

The sand stained with silica fume, soot and epoxy resin film caused by the production line is injected into the air cushion separation equipment according to the sand tank. The air separator of the resin sand production line is connected with hurricane and bag filter to remove silica powder and dust.

Sand processing equipment manufacturers: detailed introduction and analysis-show the advantages of resin sand production line.

Sand processing equipment manufacturers: 1. Solve the problem that the production line is large and tight, and it is not easy to deform during the entire operation of the production line, so that enterprises can run more smoothly when applying resin sand production and manufacturing lines.

Sand processing equipment manufacturers: 2. Resin sand solves the problem of low relativity of fixed capital cost of the production line and low relativity of industrial equipment cost of this production line, and resin sand comes from a common source, which can feel that the enterprise has saved a lot of assets. The resin sand production line does not need to be air-dried, saving resources.

Sand processing equipment manufacturers: 3. enterprise production line has a long service life and time, and its raw materials can be made of wear-resistant and corrosion-resistant carbide cutting tools. The service life of the equipment is more than 2000 yuan hours. Due to the good combing ability of the equipment, the compressive strength of the employee's labor relationship is greatly reduced.

Sand processing equipment manufacturers: 4. resin sand to solve the characteristics of the production line competitive advantage, strong applicability. After a programming design, we can use the old sand from scratch, according to the program flow is relatively simple, simple operation and low cost.

The above is the sand processing equipment manufacturers Xiaobian today to share the knowledge, I hope the above content is helpful to everyone.