Sand treatment equipment manufacturers talk about how much profit can clay sand treatment equipment production line bring?

Sand treatment equipment manufacturers talk about how much profit can clay sand treatment equipment production line bring?

Sand processing equipment manufacturers: how much profit can clay sand processing equipment production line bring?

Sand processing equipment manufacturers small series of clay is usually formed by the weathering of silicate minerals on the surface of the earth, also known as clay. As an important mineral raw material, the particles are very small, with good plasticity, adhesion and thixotropy. Its excellent performance determines its wide application. Clay sand processing equipment production line is the main production line of broken sand. When the production line is put into operation, the rough processing is to perform rough crushing first, and then send the clay material to the jaw crusher through the feeder for preliminary crushing. Next, there are two crushing stages, and then sent to the cone crusher or impact crusher through the belt conveyor to complete the secondary crushing. Then there's sand. The material that meets the feed size of the sand making machine is sent to the clay sand making machine for sand making molding. If you are not satisfied, crush it again to satisfaction, and then put it in the sand making machine, and then we can pack it.

What benefits can clay sand processing equipment production line bring to customers? Let us and sand processing equipment manufacturers Xiaobian together to see it!

1. Good operation. The main design of the clay sand processing equipment production line focuses on the tacit cooperation between multiple devices to ensure the smooth operation of the entire production line, with a high degree of automation, no material blockage or insufficient feeding.

2. Less investment, high return. Because the equipment configuration is reasonable, there is no idle spare equipment, so each device can play a role, so the user investment is low. This has a large production capacity, a short recovery cycle for user funds, and relatively high returns.

3. Equipment quality is very good. The equipment on the clay sand treatment equipment production line is produced through formal production technology and large workshops, with excellent performance, convenient maintenance, reliable work and few failures.

What is the difference between the thermal regeneration equipment and the raw sand?

thermal regeneration equipment and sand of distinction:

1. The heat regeneration equipment has high efficiency, energy saving, simple operation and no resin sand.

2. Reduce the thermal expansion rate: the sand expansion rate of the future thermal regeneration equipment is about 0.5, which is suitable for the production of high-strength, low-gas emission coated sand, which can reduce the internal stress of the casting, prevent the deformation of the casting, improve the comprehensive technical index of the casting, and improve the service life and dimensional accuracy of the mold.

3. The alkaline oxides and organic matter on the surface of the raw sand burned by the regeneration furnace are reduced, thereby improving the performance of the production of resin sand and greatly reducing gas emissions. After testing, the gas emission of the raw sand itself is 3.5-4.8 ml/g, and the gas emission of the recycled raw sand is about 0.5 ml/g.

4. Improve the bonding strength: the silicon oxygen bond activity of the sand produced by the regeneration furnace is enhanced, thereby improving the bonding strength of the sand and the resin.

Low cost of recycled sand: After the recycling furnace recovers the sand, it consumes only 68 kilograms of coal per ton, and only two people can operate it. The cost of producing 1 ton of recycled sand is within 60 yuan, and a large amount of iron filings is enough to transport recycled sand as goods.

Structure of heat regeneration equipment:

1. Built-in countercurrent heat exchanger can recover waste heat and greatly reduce energy consumption.

2. The sand automatically enters and exits and stays in the roasting chamber for enough time to obtain uniform reclaimed sand.

3. According to different resins, the baking temperature range should be between 750-900, and the sand temperature can be automatically controlled according to user requirements.

4. Roasting chamber with fluidized bed, no moving parts, made of heat-resistant steel.

These are the knowledge that the sand treatment equipment manufacturer Xiaobian talked about today. Thank you for watching.