Sand treatment equipment manufacturers talk about the reasons that affect the resin sand production line?

Sand treatment equipment manufacturers talk about the reasons that affect the resin sand production line?

Sand treatment equipment manufacturers said that the resin sand production line has little pollution to the environment, and the waste water utilization rate is very high, reaching more than 90%. Recycled sand has smooth surface and smooth distribution, which can save resin. According to relevant statistics, it can save up to 20% and reduce production costs. In addition, the reclaimed sand has stable performance and is easy to control, which can greatly improve the quality of castings.

Sand processing equipment manufacturers: The resin sand production line is very stable, but it is greatly affected by the crushing capacity, demolding effect, and dust removal effect. Improper handling will reduce product quality. The crushing ability mainly depends on the friction of the grid plate, the vibration force of the vibration motor, and the other is the effect of the gravity of the sand itself. If the crushing is too fine, it will reduce the amount of reclaimed sand and increase the cost. The demoulding effect affects the front end of the sand mold. If the demoulding is not done well, it will also cause a lot of resin waste. The installation of dust removal system should be reasonable, which affects the permeability of sand mold and the amount of resin. The combined effect of the above three factors has a great impact on the quality and cost of the resin sand production line.

Sand treatment equipment manufacturer: resin sand production line equipment operation start and stop sequence process

The resin sand production line is composed of magnetic belt separator, vibration crushing regenerator, centrifugal rotor secondary regenerator, sand bin, bucket elevator (3 sets), boom continuous resin sand mixer, pulse blowback dust collector and other equipment.

The following is the start and stop sequence of resin sand production line equipment mentioned by sand treatment equipment manufacturers. The models of other manufacturers are for reference only.

1. Start sequence of resin sand production line: start dust removal induced draft fan, bucket elevator 1 (near sand bin), double disc rotary recovery machine (disc recovery machine), bucket elevator 2, multifunctional vibration recovery machine and magnetic belt separator.

2. Shutdown sequence of resin sand production line: first stop magnetic separator belt conveyor, multi-function vibration regenerator, bucket elevator 2, double disc rotary regenerator (disc regenerator), bucket elevator 1 (near sand silo), and then stop dust removal induced draft fan.

3. The double-arm resin sand mixer is an independent working equipment, which can be started and stopped at any time according to production needs.

4. It is recommended to manually turn on the bag shaking motor of the bag filter every 2-4 hours.

The above is the knowledge about resin sand production line explained by the sand processing equipment manufacturer. I hope the above explanation will be helpful to everyone. If you want to know more relevant knowledge, you can contact our sand processing equipment manufacturer. In addition, if you need sand processing equipment, you can contact us, we are a modern high-tech enterprise specializing in the production of casting clay sand, resin sand, V method, lost foam sand treatment production line, resin sand thermal regeneration, clay old sand complete regeneration equipment. For more than ten years, the company has provided a good casting sand treatment system solution for hundreds of well-known enterprises in China. Looking forward to everyone's call.